Product Description

A fine, white cement-based material used to coat concrete layers or gypsum  board surfaces. This will result in walls and ceilings that will be smooth and very white, so they may not need further painting. ITC STUKO may be used indoors and outdoors on surfaces which are dry and free of moisture.

Italcolalbania

ITALCOL

 

For each bag of 15 kg add 7-7.5 liters of water and mix by hand or with mechanical mixing (drill) with low speed.

Mechanical mixing time should not exceed 3 minutes and the mixture must be used within 1hr. It is advised to occasionally mix the material with a hand trowel.

 

ITALCOL

 

The spreading is carried out with a metal screed in one or two layers with a maximum thickness of 1-1,5 mm each. It is recommended to wait until the first layer is dry enough to support the weight of the second  one.

 

 

ITALCOL

 

Once the material is completely dry, if necessary, sandpaper may be applied to the surface to give it a more uniform  look.

 

 

 

 

Notes:

  • Product consumption is 1 kg/m2, for a layer of 1mm.

USE

This material is mainly used for external and internal surfaces for wall coating as second layer.

It is used on gypsum and gypsum board surfaces. It is used on traditional mortar, but optimal workability and lowest consumption is obtained if used on surfaces applied with ITC 50 and also surfaces applied first with plaster finish.

It should not be applied on wood, metal or painted surfaces.

SURFACE PREPARATION

  • The application surface should be free from dust and Oil, wax and grease waste must be removed by wiping or scraping beforehand.
  • Wet the surface of dried mortar beforehand.
  • The material should be protected from frost and rapid  drying.Minimum temperature of use and drying of plaster is 50C.
  • Air out the area after the application until it is totally dry and avoid large fluctuations in temperature. During the summer, for surfaces exposed to the sun it is advisable to wet the material for several days after application.
  • Wait until material is completely dry before applying any paints on it.

PACKAGING

The item is packed in 15 kg bags with a protective layer from humidity.

STORAGE

To be stored in a dry place not more than 12 months.

QUALITY

ITC STUKO is subject to constant quality control from Italcol laboratory. Raw materials are also strictly selected and controlled. Products are certified according to ISO 9001-2008 standard and EN 998-1: 2010 standard.

 tuv-austria  ce