Product Description

ITC Colorplast is resins based paint, for indoor, that provides smoothness and a plastic effect to the surface. It can be used over new, old and previously treated surfaces that need an aesthetical, uniform touch and a high tonality of white.

Its formula makes the paint particularly suitable for cement, lime and gypsum substructures, and guarantees an easily washable surface, without damaging on the structure and the color of the paint.


Preparation of support

•All surfaces to be treated with the material should be in a dry, very clean and stable state.
•Any grease or oil residues and non adherent parts should be completely removed from the surface. Any cracks, damages, porosities or irregular parts should be repaired with Italcol products.
•Before applying the product, apply a coat of ITC ASTAR  and wait at least 12-24 hours before applying ITC COLORPLAST paint.

Preparation of product

The product needs to be diluted in 10-15% clean water. Use a drill to guarantee  homogeneity.


Before use, mix the material with a drill to make it as homogenous as  possible.

ITC COLORPLAST is applied with a brush or a roller on well dried surfaces, previously treated with ITC ASTAR. The application method consists of two coats. The second coat must be applied after the first one is completely dried.


All working equipment must be cleaned with water before the product dries   up.


Consumption highly depends on the surface’s roughness and absorption properties, as well as on the equipment. In normal conditions, consume is around 0.3-0.4  kg/m2.

Important recommendations:

  • Do not use the product on metal surfaces;
  • Do not apply the product in temperatures lower than 5°C;
  • Do not apply the product on surfaces with more than 85% humidity.


ITC COLORPLAST is a resin based paint for indoors, that provides smoothness and a plastic effect to the surface.

ITC COLORPLAST is resistant to environment conditions, such as: smoke, scratches, sun rays, vapors and water.

ITC COLORPLAST is highly adherent on all types of mortars and old and well adherent paints. Guarantees protection of the surface.


  • The product can be used on every type of indoor substrate, on mortar and cement, lime or gypsum based grout; on new and well dried surfaces, as well on old, regular, stable and not scratched ones;
  • The product can be used indoors, on previously applied paints, if well adherent to the substructure.


It comes in 5kg and 15 kg buckets.


Must be stored in dry places, between 5°C and 30°C. Keep away from heat sources.

 tuv-austria  ce