Product Description

It is an acrylic based resin, for outdoors, resistant to climate conditions: smog, the air’s salt, sun exposure, and provides the support with a durable protection. ITC AKRICOLOR can be used on new, old and previously treated surfaces that need an aesthetical, uniform finishing, with a high tonality of white and protection from climate conditions.


Preparation of support

•New surfaces to be treated with ITC AKRICOLOR should have completed their drying time frame. They must be in a very clean, not humid and stable state.
•Any grease or oil residues and non adherent parts should be completely removed from the surface.
•Any cracks, damages, porosities or irregular parts should be repaired with Italcol products
•Apply ITC AKRICOLOR 12 to 24 hours after the application of ITC ASTAR FORTE.

Preparation of product

The product needs to be diluted in 10-15% clean water. Use a drill to guarantee  homogeneity.


Before use, mix the material with a drill to make it as homogenous as  possible.

ITC AKRICOLOR is applied with a brush or a roller on well dried surfaces, previously treated with ITC ASTAR FORTE. The application method consists of two coats. The second coat must be applied after the first one is completely  dried.


All working equipment must be cleaned with water before the product dries   up.


Consumption highly depends on the surface’s roughness and absorption properties, as well as on the equipment. In normal conditions, consume is around 0.3-0.4  kg/m2.

Important recommendations:

  • Do not apply the product in temperatures lower than 5°C;
  • Do not apply the product on surfaces with more than 85% humidity;
  • Do not apply the product when it is raining;
  • Do not apply the product over non dried



ITC AKRICOLOR is an acrylic resins based paint in water dispersion, for outdoors and indoors.

Due to its compounds and particular formula, this paint provides the surface with high resistance to humidity and protection from UV rays.

ITC AKRICOLOR is highly adherent on all types of mortars, gypsum, old and well adherent paints, for outdoors and indoors. It provides the surface with an aesthetical, smooth and uniform finishing.



  • The product can be used on every type of indoor substrate, over mortar and cement, lime or gypsum based grout; on new and well dried surfaces, as well on old, regular, stable and not scratched ones;
  • The product can be used indoors, on previously applied paints, if well adherent to the substructure;
  • The product can be used on old, plastic or mineral coats, applied over the thermal insulation system and well adherent to the substructure, with no cracks, damages or porosities.


It comes in 5kg and 25 kg buckets.


Must be stored in dry places, between 5°C and 30°C. Keep away from heat sources.

 tuv-austria  ce