Product Description

A dry mortar skim coat, composed of hydrated lime, white Portland cement, selected aggregates and chemical additives that improve workability and adhesion.

Italcolalbania

ITC CAPOT GRI

 

In cases of old surfaces, or traditional mortar it is advised to wet the surface beforehand. Avoid application when freezing temperatures occurred the prior day, and avoid getting it wet because it may freeze and damage the finish.

 

 

ITALCOL

 

For each bag of 25 kg is necessary to add 7 – 7.5 liters of water and mix by hand or with mechanical mixer with the lowest speed. The mixing time with mechanical mixer should not exceed 3 minutes and the mixture must be used  within 2 hours. It is advised that the material be occasionally mixed by means of a trowel.

 

ITALCOL

 

The application should be done with a metallic screed with one or two layers with a maximum thickness of 2-2.5 mm for each of the layers. It is recommended that before applying the second coat, the first layer must have reached the necessary dryness to carry the weight of second  hand.

 

ITALCOL

 

Once the material is dry then wipe the application surface with a wet sponge until the desired final appearance is reached.

At higher temperatures or when surface is very dry, wet the material with small amounts of water.

 

 

Notes:

  • Material consumption is 2 kg/m2 for each layer of 1mm.
  • Fresh mortar should be protected from frost and a rapid drying. Minimum temperature of use and drying of mortar is 50 C.Premises must be aired after application until the material is totally dry, avoiding large fluctuations in temperature.
  • During summer, for surfaces exposed to the sun it is advisable to wet the material for a few days after application.Paints, coats are applied after mortar is totally dry.

USE

This material is mainly used in interior and exterior premises as second layer of wall coating.

It is used on traditional mortar but better workability and optimal consumption is obtained when used in surface with ITC 50.

It should not be applied on gypsum, wood, metal or previously painted surface.

SURFACE PREPARATION

  • Application surface should be free from dust and Oil, wax, and grease waste must be removed beforehand by wiping or scraping. Wet dry mortar surfaces beforehand.
  • Fresh mortar should be protected from frost and a rapid drying.Minimum temperature of use and drying of mortar is 50C.
  • Premises must be aired after application until the material is totally dry, avoiding large fluctuations in temperature.
  • During summer, for surfaces exposed to the sun it is advisable to wet the material for a few days after application. Paints, coats are applied after mortar is totally dry.

PACKAGING

The item is packed in 25 kg bags with a protective layer from humidity.

STORAGE

To be stored in a dry place not more than 12 months.

QUALITY

ITC 175 is subject to constant quality control from Italcol laboratory. Raw materials are also strictly selected and controlled. Products are certified according to ISO 9001-2008 standard and EN 998-1: 2010 standard.

 tuv-austria  ce