PLASTERING

/PLASTERING

ITC STUKO

A fine, white cement-based material used to coat concrete layers or gypsum  board surfaces. This will result in walls and ceilings that will be smooth and very white, so they may not need further painting. ITC STUKO may be used indoors and outdoors on surfaces which are dry and free of moisture.

ITC GLET

A white cement-based fine finish, used to coat concrete layers or used as a second layer on traditional finish with a maximum thickness of 2 mm. The end result of the wall or ceiling will be smooth and very white, so it may not need painting. ITC GLET may be used in indoor […]

ITC 175

A dry mortar skim coat, composed of hydrated lime, white Portland cement, selected aggregates and chemical additives that improve workability and adhesion.

ITC 125

A dry mortar skim coat, composed of hydrated lime, gray Portland cement, selected aggregates and chemical additives that improve workability and adhesion.

ITC YTONG

ITC YTONG is a dry mortar consisting of hydrated lime, Portland cement, selected aggregates and chemical additives to improve workability and adhesion in YTONG bricks of different types. Based on the characteristics that these bricks, this material provides very good adhesion and very high mechanical resistance.

ITC 75

A Dry, pre-mixed mortar used in walls and ceilings including basement works and surfaces where there may be water or moisture. It is a cement and lime based material, which when mixed with water creates a waterproof mortar. The material is for horizontal or vertical use, indoors or outdoors and for surfaces with […]

ITC 50

Aa dry mortar composed of hydrated lime, Portland cement, selected aggregates and chemical additives that improve workability and adhesion.

ITC CONTACT

ITC CONTACT is a cement-based material with special additives that makes the connection between the plastering material and the most difficult and most polished surfaces. Adhesion is very good in all substrates, and has good mechanical resistance.

ITC 40

ITC 40 is a dry mortar for masonry, consisting of hydrated lime, Portland cement, selected aggregates and chemical additives to improve workability and bonding. Used for all kinds of bricks including those made of concrete.